Firm vs Soft Mattress: How to Pick the Right One for You

Firm vs soft mattress is the decision most people get wrong — not because they choose a bad bed, but because they choose a bed built for somebody else's body. The honest answer is that neither firmness is better in general. The right one is whatever holds your spine in a neutral line and keeps pressure off your shoulders and hips, given your sleep position and body weight.

That matters because the consequences show up slowly. A mattress that's too firm creates pressure at the shoulders, hips and ribs. One that's too soft lets your hips sink out of alignment, which often turns up as lower back stiffness by morning. Both feel fine during a two-minute showroom sit. Both become obvious after a few weeks at home.

This guide gives you a practical way to decide, covering what firmness labels actually mean, how sleep position and body weight change the answer, how to test properly in a store, and what to do if you've already bought the wrong one. If you're shopping in Perth or Bunbury, you can also browse the mattress, base and ensemble range to see what's in stock before you start comparing.

Quick Takeaways

What "Firm" and "Soft" Actually Mean on a Mattress

Firmness describes how far the surface sinks under your weight. Most retailers use a 1–10 scale, roughly grouped like this:

Why firmness labels aren't standardised

There is no universal industry standard, so a "medium" from one manufacturer can feel like a "firm" from another. The same foam density under a different cover or quilt can shift the feel. Treat labels as a starting point for comparison, never as a guarantee.

Support versus comfort: the distinction that matters most

Support comes from the base layers and the foundation underneath — it's what stops your hips from dropping. Comfort comes from the top layers, which decide whether your shoulder can sink in far enough to relieve pressure. A mattress can be soft on top and genuinely supportive underneath, which is why a well-built softer bed isn't automatically bad for your back.

When you shop, ask what sits under the comfort layer. A supportive core with a softer top is often a better answer than simply choosing between "firm" and "soft".

Your Sleep Position Usually Decides It

Sleep position is the fastest filter you can apply. It tells you where your body needs give and where it needs hold.

Side sleepers

Your shoulder and hip are the widest points of your body, and they need room to sink in. A medium or soft-to-medium surface lets the shoulder drop and keeps the spine straight. On a too-firm bed, you're likely to wake with numb arms or sore shoulders. On a too-soft bed, the hips drop and the lower back twists.

Back sleepers

Your lower back needs support under its natural curve. Medium to medium-firm is usually the sweet spot. If the bed is too soft, the hips sink and the lower back arches; if it's too firm, the pelvis and ribcage take the pressure instead.

Stomach sleepers

This position needs the firmest surface of the three. Your hips are the heaviest point, and on a soft bed they sink down, which pulls the lower back into an arch that lasts all night.

Combination sleepers

If you move between positions, you want a mattress that responds quickly rather than one that traps you in a hollow. A medium-firm hybrid with pocket springs and a comfort layer usually works better than a deep, slow-sinking foam.

Body Weight and Build Change the Math

The same mattress can feel like two completely different beds to two different people, because firmness is really about how far you compress the surface.

As a rule of thumb: if you're heavier than average, go one step firmer than the label you'd otherwise pick. If you're lighter, go one step softer. If you and your partner differ significantly in weight, expect the same mattress to feel different to each of you — which is one argument for a topper, or a bed with independently adjustable comfort zones.

Worked example: two sleepers, two different answers

Take two people testing the same medium-firm pocket-spring mattress in a showroom.

Sleeper A is a 58 kg side sleeper who wakes with shoulder pain on her current firm bed. On the medium-firm, she can still feel resistance at the shoulder. The better answer for her is a medium with a softer, pressure-relieving comfort layer.

Sleeper B is a 95 kg back sleeper whose hips sink on his current soft mattress, leaving him stiff in the lower back. The same medium-firm bed holds his hips level. For him, that mattress is the right choice — or one step firmer.

Identical bed, opposite verdicts. That's why advice that names a single "best" firmness is close to useless without knowing who's sleeping on it.

The Real Tradeoffs of Firm Versus Soft

Every firmness level buys you something and costs you something. Here's the honest version of that trade.

Firmness What you gain What you give up Often suits
Soft (1–3) Pressure relief at shoulders and hips, cradled feel Less hip support, harder to move around, can sleep warm Lighter side sleepers
Medium (4–6) Balance of contouring and support Can feel vague if you prefer a definite feel Most side and combination sleepers
Medium-firm (6–7) Spine alignment, easy movement, good edge support Less shoulder cushioning Back sleepers, average to heavier builds
Firm (7–10) Strong hip and lower back support, sleeps cooler, durable feel Pressure points, light sleepers may float on top Stomach sleepers, heavier sleepers

Medium-firm sits in the middle for a reason: it's the compromise that causes the fewest problems across the widest range of bodies. It's not automatically the best choice for you, but it's a sensible starting point to test against.

How to Test a Mattress Properly in a Store

Most people test a mattress the way they test a couch — a quick sit, a hand press, a decision. That tells you almost nothing about eight hours of sleep. Use this sequence instead.

  1. Wear comfortable clothing and take your shoes off. You can't judge pressure relief through a jacket and boots.
  2. Bring your own pillow if you can. Pillow height changes your spine angle more than most people realise.
  3. Lie in your normal sleep position for 10–15 minutes. Set a timer. Two minutes isn't enough for pressure to build.
  4. Check your alignment. On your back, slide a flat hand under your lower back. It should feel supported, not gaping and not lifting you.
  5. Test how you get in and out, and sit on the edge. If you need a handrail to stand up, the bed is too soft for daily use.
  6. Ask about the foundation and the return policy. A firm mattress on a flexing base behaves very differently to the same mattress on a solid one.

Common testing mistakes

Can You Change a Mattress's Firmness After You Buy?

Partly, and only in one direction. You can reliably make a mattress softer. Making one firmer is much harder.

To soften a firm mattress

A quality topper — memory foam, latex or a fibre-filled option — adds a pressure-relieving layer on top without changing the support core. This is the single most practical fix if the bed is slightly too hard, and it's also the standard workaround for couples who prefer different feels.

Why firming up is difficult

You can't add firmness to the top comfort layers, and putting a board under a soft mattress doesn't stop the foam from sagging. In most cases, a mattress that's genuinely too soft for your body weight is a replacement, not a repair.

Give it a break-in period

New mattresses soften slightly over the first few weeks as the comfort layers compress. Judge the bed after a month, not after the first night. Rotating it regularly also helps it wear evenly — particularly if you sleep on one side more than the other.

Mattress type changes how firmness feels

If you use an adjustable base, remember it changes the angle of your body — not the firmness of the surface. It can still meaningfully reduce pressure for people who read or work in bed, and you can see adjustable beds and bedroom furniture alongside mattress options when you're comparing setups.

Frequently Asked Questions

Is a firm mattress better for back pain?

Not automatically. Many people with back pain do best on a medium-firm surface, because a bed that's too firm creates pressure points and a bed that's too soft lets the hips drop out of alignment. If your pain is persistent, treat the mattress as one factor and speak to a health professional about the rest.

How long does it take to get used to a new mattress?

Allow roughly two to four weeks. The comfort layers soften slightly and your body adjusts. If you're still waking with pain or stiffness after a month, the firmness is probably wrong for you rather than just unfamiliar.

Do heavier people need firmer mattresses?

Generally yes. Heavier sleepers sink further into any given surface, so a medium that supports an average-weight sleeper can behave like a soft. Going firmer — or choosing a mattress with a stronger support core — keeps the spine level.

Is a soft mattress bad for your back?

Not inherently. A well-built soft mattress with proper support underneath works well for lighter side sleepers. The problem is softness without support, where the middle of the bed sags and the lower back follows it.

What if my partner and I prefer different firmness?

Start with medium-firm for both of you, then let the person who wants softer add a topper to their side. If the gap is large, look for a bed with split or adjustable comfort zones rather than compromising on something that suits neither of you.

The Bottom Line

There is no universal winner in the firm versus soft mattress debate. Side sleepers and lighter bodies lean soft to medium. Back sleepers, stomach sleepers and heavier bodies lean medium-firm to firm. Medium-firm is the safest starting point for most adults, and a topper is your escape hatch if you land slightly too hard.

The next step is the one most people skip: go and lie on a few mattresses in your normal sleep position, for ten minutes each, with your own pillow. If you're in Perth or Bunbury, you can check the current mattress, base and ensemble range and compare firmness options in person — a twenty-minute test will tell you more than any firmness chart.

Rule of thumb to take with you: choose the softest mattress that still keeps your hips level — not the firmest one you can tolerate.